Traxxas 4570 EZ-Start System Complete Nitro Vee E-Maxx Rustler Sport Stampede

This is the Easy Start Starting System for Traxxas Nitro Vehicles using the Traxxas TRX and TRX PRO Engines such as NITRO SPORT, NITRO RUSTLER, NITRO STAMPEDE, AND NITRO VEE. To install on Nitro Hawk, Nitro Buggy, Nitro Street requires modifications.

NOTE: This is NOT designed for use on any other manufacturer's engines

Starting your Traxxas nitro vehicle with a push of a button.

One Control box pre-wired w/LED indicator light.
One Wiring Harness
One Preassembled Starter rs380sh motor and gear box.
Five White nylon tie straps
One Hardware bag w/screws, nut, washers, mount, double sided tape.
One Instruction sheet.

6-cell battery w/Tamiya plug, battery charger (peak detection or
15-minute quick charger).

If installing on a Nitro Rustler #4550 header is required.

Starter Conversion: If The Traxxas Engine Already Has A Pull Starter. Simply Take Remove Pull Starter and Install This Easy Start System. If The Traxxas Engine Does Not Have A Pull Starter At All

Purchase: TRAG4077-Starter Shaft, TRAG4074-Backplate, TRAG4011-One- Way Bearing, TRAG4013-Gasket and TRAC5552-3x8mm Screws.

NOTES: Per TRAXXAS the rear gear is now metal. And anyone who has stripped out this plastic rear gear can call them and they will replace it for free.

Because of the size of the tip of the Traxxas glow plugs, the Easy Start will only work with Traxxas glow plugs. Most other glow plugs have a tip that is too large for the lead to connect to without damaging the lead.