Hot Racing TE892H Hard Aluminum Spur Gear (92T/48P) Traxxas Slash 2wd Rustler Stampede
Hot Racing light weight hard anodized aluminum 92 tooth, 48 pitch spur gear for the Traxxas Bandit, 2WD Slash, Rustler, and 2WD Stampede vehicles - CNC machined 6061-T6 aluminum construction
- Replaces stock nylon spur gear
- Hard anodized in light gunmetal color for durability and corrosion resistance
- Silver anodized countersunk aluminum washers
- High strength hardware
- Three (3) mounting screws
- Three (3) silver anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
- Number of Teeth: 92
- Gear Pitch: 48 pitch
- Mounting Holes: 3
- Tooth Face width: ~5mm - Aluminum gears are softer than steel and are intended for speed performance. For ultimate durability consider our our steel gears.
- Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting
- Check gear alignment and secure you motor before running the vehicle
- Do not over tighten the slipper. Even metal gears may fail with a over tight slipper.
- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC.
FEATURES:
- Replaces stock nylon spur gear
- Hard anodized in light gunmetal color for durability and corrosion resistance
- Silver anodized countersunk aluminum washers
- High strength hardware
YOU WILL RECEIVE:
- One (1) 92 tooth 48 pitch spur gear- Three (3) mounting screws
- Three (3) silver anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
SPECIFICATIONS:
- Gear Pitch: 48 pitch
- Mounting Holes: 3
- Tooth Face width: ~5mm
COMMENTS:
- Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting
- Check gear alignment and secure you motor before running the vehicle
- Do not over tighten the slipper. Even metal gears may fail with a over tight slipper.
- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC.
Brand | Hot Racing |
---|---|
MPN | TE892H |
Part Type | Spur Gear (48P) |
Eligible for Free Shipping | No |
Write Your Own Review
More from Hot Racing