Futaba FUT01004353-3 3pv R203gf 3pv W/R203gf Receiver FHSS

This is the Futaba 3PV 3-Channel Radio System with the 3-Channel R203GF Receiver.

FHSS/T-FHSS, S-FHSS protocols
Large, easy to read programming screen
Four wheel steering and brake mixing
Model data copy
Anti-lock brake system (ABS) function
R203GF 3-channel receiver is ideal for brushless ESCs and digital servos
DT3 selection
SW1
Throttle fail safe
Steering and throttle trim
Channel 4 trim
Sub trim
Steering dual rate adjustment
Steering and throttle end point adjustment
Channel 3 and 4 end point adjustment, and servo reversing
Steering and throttle exponential
Auto power off after ten minutes
One year limited warranty through Hobby Services beginning at date of purchase

Futaba 3PV 3-Channel Transmitter, 3-Channel R203GF Receiver, Instruction Manual

AA Batteries: Four for transmitter (may also be powered by the Futaba HT5F1800B 6V NiMh pack FUTM1482, or the Hobbico LiFe 6.6V 1900mAh pack, HCAM6521

Transmitter; Transmitting Frequency: 2.4GHz band Power Requirement: Four AA cells Current Drain: 100mA or less Transmission Antenna: Dipole (built in) Communication Method: Two way T-FHSS, one way S-FHSS, FHSS operating system
R203GF Receiver, FUTL7603;

1.54 x 0.91 x 0.33" (39 x 26 x 10mm) Weight: 0.28oz (8g) Operating Voltage: 4.8 - 7.4V (shared with servo) Battery Fail Safe Voltage: 3.8V* Current Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/ NiMh battery.
Battery F/S does not work properly when other type of battery is used
Antenna length: 7.5" (190.5mm)

For an optional charger, you can use FUTM1832, or if you already have a charger and need a charge lead Futaba Support can sell you part number- HSP29615. (requires soldering on the correct charger plugs)