Traxxas JT107W06 Jato 17mm Hex Wide +5mm Wheel Hubs Adapters Bearings Hot Racing

Hot Racing aluminum 17mm hex hub adapter set for the Traxxas Jato vehicles. These allow you to use wheels with a 17mm hex on your Jato and provide a width increase of approximately 8mm per side.
- Converts front wheel bearing and rear 12mm hex setup to 17mm hexes
- CNC machined 6061 aluminum adapters and wheel nuts, anodized silver and blue, respectively
- Increases vehicle width for increased stability; 8mm and the rear, with the front depending on the wheel set chosen
- 17mm wheel nut with internal o-ring to prevent nut from loosening
- Two (2) front adapters
- Two (2) rear adapters
- Four (4) 5x8x2.5mm sealed ball bearings for front adapters
- Four (4) M4 axle hub barrel nuts
- Four (4) 17mm hex wheel nuts
- Two (2) 2x10mm axle pins
- One (1) 4mm hex key
- Installation
- Two 5x11x4mm front bearings from stock vehicle
- Medium thread lock (e. g. blue Loctite) on M4 axle hub barrel nuts

COMMENTS:

- Silicone shock oil on wheel nut o-rings will ease their installation
- Replacement Hot Racing parts include: RSLF117X06 (17mm hex nuts), RSSLF117X (M4 axle hub barrel nuts)