HPI 15105 Nitro Star G3.0 Engine W/Ps Firestorm 10T

This is the HPI Nitro Star G3.0 Engine with Pull Starter used in the HPI Fire Storm - HPIC0510.

Composite body rotary valve carburetor with 5.5mm bore
Silver colored cooling head
SG (pilot) type crankshaft
Two year limited warranty

HPI Nitro Star G3.0 Engine with Pull Start, instruction manual, R5 cold glow plug (HPIG1504), foam air cleaner assembly with four zip ties, brass collet

Fuel: Car blend with 20-25% nitro content
Misc Items: Fuel tubing and track equipment

Specs such as horsepower, bore, stroke and RPM were not provided-contact HPI for further infomation
High Speed Needle Setting: Turn clockwise in 1/8 turn increments to lean fuel mixture. Do not exceed 2-1/2 turns from flush
Idle Adjustment: Adjust for about 0.04" (1mm) gap between slide valve and carb body at bore opening
Low Speed Needle: No adjustment recommended
Displacement: .18 cu in (3.0cc)
Distance Between Mounting Holes Same Side: 0.43" (11mm)
Distance Between Mounting Holes Opposite Side: 1.22" (31mm)
Height/Bottom Mounting Flanges to Top of Cylinder Head: 2.99" (76mm)
Height/Bottom of Crankcase to Top of Cylinder Head: 3.5" (89mm)
Length from Pull Starter to End of Crankshaft: 4.13" (105mm)
Length from Pull Starter to Front Bearing: 3.3" (75.3mm)
Length from Center of Crankcase to End of Crankshaft: 2.96" (75mm)
Diameter of Carburetor Bore: 0.21" (5.5mm)